AC&NC JetStor SATA 516F

Applications

Video Color Correction
2K Film
DVR / Video Surveillance
Uncompressed SD and HD video
Audio & Video Streaming
Digital Cinema
Near line digital content
Diagnostic Imaging / Radiology
Pre-press Production
High Performance File Server

Key Benefits

Based on the 5th generation RAID controller architecture, JetStor SATA Model 516F 16 bay RAID array combines high density SATA drives with lightning-fast 4Gbit/sec fiber host channels for a rapid, uninterrupted access to your most demanding applications requiring high bandwidth. It easily handles uncompressed 1080i high-definition video stream. Engineered to meet stringent demands for continuous availability, JetStor SATA 516F RAID array features powerful PowerPC RISC processor for blazingly fast I/O operations, parity-assist ASIC, completely cableless backplane-based design, and storage capacities of almost 12TB in one small 3U enclosure.

Low service and integration costs are assured by the JetStor's cableless design, two redundant hot-swappable power supplies with two independent power inputs, turbo cooling fans, and embedded RAID controller. Three year warranty comes standard with every array and covers all components.

The JetStor SATA 516F RAID addresses many challenges present in video production studios and delivers ample bandwidth, unparalleled storage flexibility, higher levels of data availability, management and configuration simplicity, all while securing maximum investment protection to support future growth.

Advanced Features

600MB/sec bandwidth to support the most demanding non-linear editing and SAN environments.

Exclusive Advanced Data Sentry technology (RAID 6) provides the highest level of data protection. Multiple simultaneous drive failures can be tolerated without downtime or data loss.

Array Roaming feature gives administrators the ability to move a complete raid set to another system without losing RAID configuration and data on that raid set.

Redundant Flash Image provides an extra layer of protection against the firmware image corruption. If the primary firmware of the RAID controller becomes corrupted, the secondary firmware image will automatically be used.

Full 48-bit ATA addressing standard support allows for up to 144 petabytes capacity per drive to be utilized in the RAID array.

ASIC assisted parity for lightning-fast throughput.

RAID controller provides RAID 0, 0+1, 1, 3, 5, and RAID 6, Global Hot Spare Disk, Auto Rebuild, and up to 2GB of DDR2 ECC SDRAM-based data cache.

Intelligent SATA backplane design (uses no cables) allows "hot swapping" of disk canisters, power supplies, and fans for increased reliability, lower cost, and ease of maintenance.

Built-in management Ethernet port provides easy access to the web-based GUI RAID Manager for configuration, management, and monitoring functions. E-mail event notification is built-in.

Completely user configurable via the front panel.

Online Parity Consistency verification feature insures RAID set integrity.

Drive Capacity

Serial ATA drive capacities of 73GB (10,000 rpm), 150GB (10,000 rpm), 120GB (7,200 rpm), 160GB (7,200 rpm), 200GB (7,200 rpm), 250GB (7,200 rpm), 300GB (7,200 rpm), 400GB (7,200 rpm), 500GB (7,200 rpm), and 750GB (7,200 rpm) are available.
Full 48-bit ATA addressing standard support.
Maximum capacity 12TB when using 750GB drives.

Technical Specifications

RAID Architecture	64-bit RISC PowerPC 440SP Storage Processor Up to 2150 Mb/sec internal bandwidth 266 MHz PCI-X 2.0 interface to the backplane
Host Bus Interface	Two, 4Gbit/sec Fiber Channel Optical SFP, LC cables
Disk Bus Interface	Sixteen 3 Gb PHY Serial ATA Interface channels (SATA II); 48-bit addressing S.M.A.R.T. and NCQ supported
Command Queuing	253 commands (host FC channels)
Cache	Up to 2GB (using one, industry-standard DDR2 ECC SDRAM)
Operating Systems Supported	Mac OS X and OS 9, Windows Server 2003, Windows 2000 and MSCS (Microsoft Cluster Server), Windows NT, Sun/Solaris, Linux, FreeBSD, and others to be announced
Temperature	50°F to 104°F operating, -40°F to +140°F non-operating 10°C to 40°C operating, -40°C to +60°C non-operating
Relative Humidity	10% to 85% non-condensing (operating), 5% to 90% non-condensing (non-operating)
Certifications	FCC, CE, TUV, and UL/CSA
Size/Weight	19" wide, 22" deep, 5.25" (3U) high; 40 lb. / 18 kg. (without disk drives)
I/O Connectors	Two 4Gbit SFP Fiber Channel Two 9-pin DB9 type RS-232 serial terminal port, UPS port RJ45 Management Port / Ethernet
Power Required	110 or 220 VAC, ±20% @ 6 amps / 3 amps peak; 47 to 63 Hz. autosensing Dual 460W power supplies with two independent power inputs

Privacy Notice