AC&NC JetStor SCSI 416F

Applications

High Performance File Server
Imaging
Disk-to-Disk Backup
Audio & Video Streaming
Digital Video Recording

Key Benefits

Raising the bar to a new level, JetStor SATA Model 412S 12-bay RAID array delivers reliable data protection combined with the blazing performance of Ultra320 SCSI to support mission critical business applications. Engineered to meet stringent demands for continuous availability, JetStor SATA 412S RAID array features powerful 400MHz 64-bit RISC processor for blazingly fast I/O operations, parity-assist ASIC, completely cableless backplane-based design, and storage capacities reaching 9TB in one small 2U enclosure.

Low service and integration costs are assured by the JetStor's cableless design, dual redundant hot-swappable power supplies with two independent power inputs, turbo cooling fans, and embedded RAID controller. Three year warranty comes standard with every array and covers all components.

The JetStor SATA 412S RAID addresses many challenges present in datacenters and delivers unparalleled storage flexibility, higher levels of data availability, management and configuration simplicity, all while securing maximum investment protection to support future growth.

Advanced Features

Exclusive Advanced Data Sentry technology (RAID 6) provides the highest level of data protection. Multiple simultaneous drive failures can be tolerated without downtime or data loss.

Array Roaming feature gives administrators the ability to move a complete raid set to another system without losing RAID configuration and data on that raid set.

Redundant Flash Image provides an extra layer of protection against the firmware image corruption. If the primary firmware of the RAID controller becomes corrupted, the secondary firmware image will automatically be used.

Full 48-bit ATA addressing standard support allows for up to 144 petabytes capacity per drive to be utilized in the RAID array.

ASIC assisted parity for lightning-fast throughput.

SNMP supported.

RAID controller provides RAID 0, 0+1, 1, 3, 5, and RAID 6, Global Hot Spare Disk, Auto Rebuild, and up to 1GB of DDR ECC SDRAM-based data cache.

Intelligent SATA backplane design (uses no cables) allows "hot swapping" of disk canisters, power supplies, and fans for increased reliability, lower cost, and ease of maintenance.

Built-in management Ethernet port provides easy access to the web-based GUI RAID Manager for configuration, management, and monitoring functions. E-mail event notification built in.

Completely user configurable via the front panel.

Online Parity Consistency verification feature insures RAID set integrity.

Drive Capacity

Serial ATA drive capacities of 73GB (10,000 rpm), 150GB (10,000 rpm), 120GB (7,200 rpm), 160GB (7,200 rpm), 200GB (7,200 rpm), 250GB (7,200 rpm), 300GB (7,200 rpm), 400GB (7,200 rpm), 500GB (7,200 rpm), and 750GB (7,200 rpm) are available.

Full 48-bit ATA addressing standard support.

Maximum capacity 9TB when using 750GB drives.

Technical Specifications

RAID Architecture	64-bit RISC 100MHz CPU with 100MHz memory bus Up to 800 Mbytes/sec internal bandwidth Dual PCI bus architecture
Host Bus Interface	Two, 320 MB/sec. Ultra320 LVD (Low Voltage Differential) SCSI
Disk Bus Interface	Four, 320 MB/sec. Ultra320 LVD (Low Voltage Differential) SCSI
Command Queuing	253 commands (host and disk SCSI channels)
Cache	Up to 1GB (using one, industry-standard 144 pin 133MHz SO-DIMM SDRAM) ECC function is supported by the RAID controller
Operating Systems Supported	Windows Server 2003, Windows 2000 and MSCS (Microsoft Cluster Server), Windows NT, Sun/Solaris, Linux, Tru64 Unix, HP/UX, IBM AIX, SGI IRIX, DEC VMS, MAC OS, FreeBSD, Novell, and others to be announced
Temperature	50°F to 104°F operating, -40°F to +140°F non-operating 10°C to 40°C operating, -40°C to +60°C non-operating
Relative Humidity	10% to 85% non-condensing (operating), 5% to 90% non-condensing (non-operating)
Certifications	FCC, CE, TUV, and UL/CSA
Size/Weight	19" wide, 20.5" deep, 5.25" (3U) high; 40 lb. / 18 kg. (without disk drives)
I/O Connectors	Five VHDCI SCSI; three 9-pin DB9 type RS-232 serial terminal port, fax / pager port, UPS port
Power Required	110 or 220 VAC, ±20% @ 6 amps / 3 amps peak; 47 to 63 Hz. autosensing Three independent power inputs

Privacy Notice