Adaptec
SANbloc S50 JBOD

Storage with the right performance, reliability and price

TECHNICAL SPECIFICATIONS

Benefits
Ability to mix and match SAS and SATA drives to achieve the right performance, reliability, and price.

Key Differentiators
Point-to-point connectivity isolates drive failures, increasing reliability, and fault tolerance and improves performance.

Meet your growing data demands with your choice of 9TB of SATA storage or 3.6TB of SAS storage

Customer Needs
High availability, exceptional scalability and superior performance for high bandwidth applications.

Capacity
SATA: Up to 12 drives (9TB) capacity per 2U enclosure

SAS: Up to 12 drives (3.6TB) capacity per 2U enclosure

Network or Host Interface

One SAS I/O module supports two SAS connections
SAS connections can be used for host connections or as a combination of host connection and expansion
Each SAS connection supports up to 1,200MB/s

Data Transfer Rate
2400MB/s bandwidth

Package Contents
SANbloc 3.6Gb JBOD including:
2U, 12-bay drive enclosure
2 power supply units
SAS I/O module
2 advanced power and cooling modules (APC)
2 independent AC power inlets
Users Guide
Installation CD

Warranty
3-year system warranty

Device Drive Interface
Twelve independent 300MB/s point-to-point connections to each SAS or SATA disk drive

Measured Performance
Up to 750MB/s (sustained reads)

I/O Module Features
Single controller
Auto-negotiate speeds
Inband and out-of-band management
SMP and SSP command/protocol support
Redundant cable support

Hotswap And Redundant Components
Two advanced power and cooling modules (APC)
Two independent AC power inlets
Up to 12 drives
No active components on data path

Maximum SAS Cable Length
3m

Rackmount Enclosure Dimensions
3.5in H x 17.6in W x 19.5in D
(8.9cm H x 44.7cm W x 49.53cm D)

Weight with drives: 60 lbs (27 kg) max

Monitoring
Temperature, advanced power and cooling modules including fan speed control, disk drives, and I/O module, as well as error rates and quality of service on each SAS connection

Disk Drives
Capacity: Up to 750GB
Rotational velocity: 7200 RPM, 10K RPM, 15K RPM
Interface: 3Gb SAS; 3Gb/1.5Gb SATA II
Form factor: 3.5in. form factor, 1.0in. height
Supported drives: Only S50/Snap Server disk drives

AC Power
Input voltage: Autoranging, 85-264 VAC
Input frequency: 47-63 Hz
Power factor correction: Per EN61000-3-2
Input current: 100-240 VAC @ 4-2.5 A
Output power: 491 W peak, 430 W average

Operating Environment
Temperature: 0° to 40° C
Temperature gradient: 20° C per hour
Relative humidity: 5 to 95 percent (noncondensing)
Altitude: -200 to 10,000ft
Shock: 5G @ 11ms, 1/2 sine wave pulse
Vibration: 0.2G @ 5Hz to 350Hz

Electromagnetic Emissions Standards
CE Mark, EN55022 Class A, EN61000
Class A, FCC Class A, Canadian DOC
Class A,VCCI Class A

Safety Standards
UL 1950, CSA 22.2-950, EN 60950

Quality Standards
Manufactured under an ISO 9002 registered quality system

PRODUCT DESCRIPTION

The Adaptec SANbloc S50 JBOD is the simplest way to integrate the performance, reliability, and cost-effectiveness of Serial Attached SCSI (SAS) into your storage strategy. Whether you are creating or scaling your storage solution, the Adaptec S50 enables you to scale from 3.6GB to multiple terabytes of data capacity. Mix and match low-cost Serial ATA (SATA) and high-performance SAS drives to achieve the right balance of performance and cost.
The SANbloc S50 is perfect for data- and transaction-intensive applications. SAS host connections transfer terabytes of data at speeds up to 1200MB/s. Now, there's no need to choose between low cost or high performance!

Highlights

Mix and match SAS and SATA drives to balance performance, reliability and cost
Meet growing data demands with 9TB of SATA storage or 3.6TB of SAS storage
Point-to-point connectivity isolates drive failures, increasing reliability and performance
Easily scale performance and capacity

Privacy Notice